Mitsubishi xl1u projector manual

Find a Projector. Classroom Interactive Portable. Throw Calculator. Mitsubishi XL1U Projector. Highlights Specifications. Jump to Highlights Calculate Throw Distance. Product Downloads Product Sheet.

User Manual. Depending on the type of the screen, the distance is different. Page 9: Installation Installation Orientation of the projector Picture size can be set by changing the distance between the screen and the projector. Front projection Screen between the screen and the head of the projector Screen Diagonal size Height Width inch inch inch 30 " Speaker output is mono.

Please check the available cable for the audio input terminal of the PC. Some personal computer may not have the audio output terminal. Connect the power cord to the wall power outlet. Remove the lens cap. If you leave the power on with the cap on, the cap may be warped. Turn on the equipment connected to the projector.

Put the projector into standby mode by pressing the main power switch. If you wish to turn on the projector again, wait until the indicator is off then press the POWER button. Use the remote control to turn on the lamp. Set the time elapsed before the projector enters into the stand-by mode when there is no signal inputted from the selected source.

Use to adjust the horizontal position of the image. Use to adjust the vertical position of the image. Use to synchronize the projector with PC input signals so that the image is not blurred.

Page Picture Adjustment The white, which temperature is low, becomes raddish white. When the color temperature is higher, the white becomes more bluish. This projector sets this color temperature by changing the numbers of contrast blue and red. Page Adjustment From Personal Computer Adjustment from personal computer Although this projector sets proper signal systems automatically for the image signal from personal computers, it cannot be applied to some of personal computers.

If the images are still not projected correctly, use the MENU display to adjust the projected im- ages. Using the Expand mode 1. When connecting the PC with the projector when the personal computer is on, the remote control does not work as a mouse.

In that case, turn the projec- tor on, then restart the personal computer. Page Maintenance Maintenance Caution: Be sure to turn off the projector and unplug the power cord from the wall outlet before you perform any main- tenance on the projector.

Cleaning the air-filter Clean the air-filter frequently. If the filter or ventilation grille become clogged with dirt or dust, the temperature inside the projector may rise and shut off the power the TEMP indicator starts to blink red. The image is dark.

The following offers solutions to possible problems. If a problem persists, turn the projector off and consult your dealer. Refer to the information that came with the Kensington System for instructions on how to use it to secure the projector.

Please contact to Kensington Technology Group as shown below. If you do not follow this order, the Comport may not function. Contact your dealer for details.